Электричка EMU 6111 для Railworks. Сценариев нет. Для конструкторов и творчества.
http://ifolder.ru/30302643
Электричка EMU 6111 для Railworks.
-
- Новичок
- Сообщения: 11
- Зарегистрирован: 17 апр 2012
- Репутация: 3
Электричка EMU 6111 для Railworks.
У меня вопрос,электричка готова?В редакторе поставил её,электрички стоит в бело-жёлтой покраске не дверей,не окон не чего нет кроме формы поезда.
Электричка EMU 6111 для Railworks.
Видимо топикстартер забыл указать, что эта электричка была сделана для MSTS и сконвертирована для RW в 2009 (!) году.
"It's in early beta. It's not complete. There no original cab. There no original sound. Texture will be better."
http://www.uktrainsim.com/filelib-info. ... leid=21435
Её работоспособность в RW3 разумеется не гарантированна.
"It's in early beta. It's not complete. There no original cab. There no original sound. Texture will be better."
http://www.uktrainsim.com/filelib-info. ... leid=21435
Её работоспособность в RW3 разумеется не гарантированна.
-
- Новичок
- Сообщения: 11
- Зарегистрирован: 17 апр 2012
- Репутация: 3
- losevo58
- Ветеран
- Сообщения: 3028
- Зарегистрирован: 25 май 2011
- Откуда: Санкт - Петербург
- Репутация: 411
Электричка EMU 6111 для Railworks.
В меню редактора слева, щелкнуть по синему кубику. Из меню справа экрана щелкают и выбирают, RSvlado в выпадающем меню ставим галочки. Щелкните в коробке рядом с ЕВС 6111. Теперь, когда Вы идете в меню слева сторона и выбираете из списка локомотивов, Вы должны видеть 6111_a, 6111_b и 6111_c. Разместите их в след в том же самом порядке, как он написан. (и не забывайте добавлять водителя).
Description : EMU 6111
------------------------------------------------------
Couplings fix for RailWorks and removed unnecessary textures.
MSTS to RailWorks version
It's in early beta. It's not complete. There no original cab. There no original sound. Texture will be better.
http://en.wikipedia.org/wiki/H%C5%BD_series_6111
EMU is free to be distributed but with the name of the author unchanged. 3D model created by Daniel Hermann and RS adaption done by Vlado Akmacic.
To make the EMU available you will need to be in a scenario. Click on the globe icon at the bottom of the screen, then the orange loco icon at the top left (confirm yes to enter editing mode). From the menu on the middle of the left hand side, click the blue cube. Then, from the menu on the right hand side of the screen click and choose RSvlado from the drop down list. Click in the box next to EMU 6111. Now, when you go to the menu on the left hand side and choose from the list of locos, you should see 6111_a, 6111_b and 6111_c. Place them on a track in same order as it is written. (and don't forget to add a driver).
3D model and texture created by Daniel Hermann and RailWorks adaption done by me using 3D Canvas (http://www.amabilis.com), the cabs, physics, driver and sound are all RailWorks productions.
Note: Anyone can freely make this model available on their websites and offer it for download. You don't need to ask permission from me. Only condition is to notify me of the location of the download. It is for my personal records and statistics. Also you need to follow the rules that are written in the attached file
Description : EMU 6111
------------------------------------------------------
Couplings fix for RailWorks and removed unnecessary textures.
MSTS to RailWorks version
It's in early beta. It's not complete. There no original cab. There no original sound. Texture will be better.
http://en.wikipedia.org/wiki/H%C5%BD_series_6111
EMU is free to be distributed but with the name of the author unchanged. 3D model created by Daniel Hermann and RS adaption done by Vlado Akmacic.
To make the EMU available you will need to be in a scenario. Click on the globe icon at the bottom of the screen, then the orange loco icon at the top left (confirm yes to enter editing mode). From the menu on the middle of the left hand side, click the blue cube. Then, from the menu on the right hand side of the screen click and choose RSvlado from the drop down list. Click in the box next to EMU 6111. Now, when you go to the menu on the left hand side and choose from the list of locos, you should see 6111_a, 6111_b and 6111_c. Place them on a track in same order as it is written. (and don't forget to add a driver).
3D model and texture created by Daniel Hermann and RailWorks adaption done by me using 3D Canvas (http://www.amabilis.com), the cabs, physics, driver and sound are all RailWorks productions.
Note: Anyone can freely make this model available on their websites and offer it for download. You don't need to ask permission from me. Only condition is to notify me of the location of the download. It is for my personal records and statistics. Also you need to follow the rules that are written in the attached file
Борисыч!
- Sin Semilla
- Бывалый
- Сообщения: 27
- Зарегистрирован: 05 янв 2012